Refer to the CD writer software documentation for information on creating a CD from an image file. Although this step references software that is specific to HP commercial notebooks, the process will produce a DOS bootable USB drive for use with HP commercial desktop and notebook computers. Failure to do so may result in misidentification of the USB Drive and data loss due to formatting. EXE from within Windows. If not, select the correct drive from the Device drop down list. Failure to select the correct drive may result in data loss.
Check the box next to Create a DOS startup disk using system files located at:. Select a location. Europe, Middle East, Africa. If not, select the correct drive from the Device drop down list. Failure to select the correct drive may result in data loss. Check the box next to Create a DOS startup disk using system files located at:. When you are unable to factory reset Windows in settings, you can use the Boot Menu key to give it a try.
Note that this operation will fully erase all files on your disk. So before you start, make sure that you have fully backed up the computer data. Remove or unplug all unnecessary external devices and restart the HP computer. Step 4. Select "Factory Reset" and follow the onscreen guide to finishing the process. When you are not satisfied with the current OS or you want to revert your Windows OS to a previous system state with the created system image, you can try this out.
Note that this operation may also cause some file loss on your system C drive. So please make sure that you've backed up all important system C drive files. If you feel regretful, check this out: How to Undo System Restore. In a word, stop using your computer immediately once you lost files using the HP boot menu key on Windows 10 for restoring or resetting the OS. If you have a network drive that supports you to access and boot your computer, you can try this option.
To boot an HP computer from a network drive, it's quick and efficient. Sometimes, when the HP computer OS crashes or becomes unbootable, you may need help to perform data recovery from the HP boot menu.
If your computer is currently unbootable or dead, you can turn to bootable data recovery software for help. It allows you to create a bootable media and boot HP from its boot menu to fully scan and restore all valuable hard disk files.
You can use this powerful data recovery software to recover data from dead HP laptop hard drive. Search for and open HP Recovery Manager. Click I Accept to the notification that only one set of recovery media can be made.
If the size of the USB drive is larger than 32 GB, the extra size on the flash drive might not be usable after the recovery media is created. Please be aware that all data on the selected USB flash drive is lost after the recovery media is created. Select whether to create the recovery media on a USB flash drive or CDs and follow the on-screen instructions. Factory reset using media you created If you created your own recovery media, you can use it to perform a Factory Reset on your computer.
Failure to backup your files results in loss of files and information. After backing up your files, use the following instructions to use the media you created to recover your computer.
For detailed instructions, see Disabling Secure Boot in Windows 10 for this document. When prompted to run Recovery Manager from the hard drive or from media , select Run program from media , and then click Next. Select Factory Reset to erase all the data and information from the hard drive and restore it to the original factory condition. Then click Next. Proceeding without backing up your files results in lost files and information.
If you still have not backed up your files, select Backup your files first recommended and follow the on-screen instructions. The recovery preparation is complete. Click Continue to proceed. System recovery using media you created To recover your system with the media you created, use the following instructions.
For detailed instructions, see the Disabling Secure Boot in Windows 10 in this document. Select System Recovery to erase all the files from the hard drive and restore it to the original factory condition. Select Recover without backing up your files and then click Next. If you are using recovery discs, follow the on-screen instructions by inserting the next disc as prompted.
Do not click Cancel. Click Continue when the recovery preparation is complete. Do not turn off your computer during this process.
The computer might go through several Software Installation screens. Before using the computer, update and protect your computer by reinstalling any virus and security software that was installed before the system recovery. If you are able to boot from the Recovery media or not, it is very important to reverse the changes made in the BIOS , this means you need to load the BIOS default settings.
Otherwise this may cause instability in the system when making updates recommended by HP. Turn on the computer and immediately press the F10 key repeatedly, about once every second, until the Computer Setup Utility opens.
Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F Choose menu screens by pressing the left or right arrow keys. Use the up or down arrow keys to move through the list of items on the menu screen.
Press the Enter key to select an item and open a submenu. Then use the left and right arrow keys to modify the settings. Press the F10 key to save the changes and exit from a submenu, or press the Esc key to exit from a submenu without saving the changes. Notebooks Use the right arrow key to choose the System Configuration menu, use the down arrow key to select Boot Options , and then press Enter. Use the down arrow key to select Secure Boot , press Enter , and then use the down arrow key to modify the setting to Disable and press Enter.
Use the arrow keys to select Legacy Support and press Enter , and then use the arrow keys to modify the setting to enable and press Enter. Press F10 to accept the changes and exit or use the left arrow key to select the Exit , use the down arrow key to select Exit Saving Changes and then press Enter to select Yes.
Type the code shown on the screen, and then press Enter to confirm the change. If you are still unable to start from the recovery media, even after disabling secure boot and enabling legacy support, try to perform a recovery using HP Recovery Manager. Desktops Use the right arrow key to choose the Security menu , then use the down arrow key to select Secure Boot Configuration , and then press Enter.
Press F10 when the Secure Boot Configuration window is displayed. Use the down arrow key to select Secure Boot , then press the left or right arrow keys to modify the setting to Disable. Use the up arrow key to select Legacy Support , then press the left or right arrow key to modify the setting to Enable and press F
0コメント